
The fastest way to a tidy desk is to unplug everything, remove what you don't use, plan one route for the rest, and then bundle. Hide the excess length under the desk, but leave the plugs you reach for every day within reach. Below is the order I follow, plus the sit-stand, home office and TV variations.
TL;DR
- Unplug everything first and remove unused cables. Most desks have more cords than devices.
- Mount a tray or raceway under the desk for the power strip, then run cables sideways and down one leg.
- On a sit-stand desk, attach the power strip to the desk so it moves with it, leave slack for the highest position, and test the full travel.
- Keep charging ends and frequently used connectors visible. Hide the length, not the access.
- Follow basic cord safety: no overloaded strips, no cords under rugs, no nails or staples, and gear that carries a recognized lab mark.
Table of Contents
- Start by unplugging everything
- Plan the route before you bundle
- How to hide cables under a desk
- Keep the plugs you use visible
- Sit-stand desk cable management
- Home office cable management
- TV and living room cable management
- Safety checks before you tuck anything away
- Keep it easy to clean and change
- Take the same approach to the rest of the room
- FAQ
- Sources
Start by unplugging everything
It is tempting to buy organizers first. I'd wait. WIRED's guide to desk wires starts the same way I do: survey the mess, unplug, untangle and remove cables you no longer need, then wipe the desk and the cords before planning routes.
Here is a version that takes about half an hour:
- Photograph the back of the desk. You will want a reference when something stops working.
- Unplug everything, one device at a time, and set each cable next to the thing it powers.
- Retire the strays. Old phone chargers, a mouse cable from a mouse you replaced, and adapters for gear you sold are the usual culprits.
- Wipe the desk and the cables. Dust is the hidden part of a cable nest, and it is much easier to clean before everything is bundled.
- Move seldom-used accessories off the desk. Wirecutter's desk organization guide suggests storing those devices and their cables elsewhere, which removes cords from the problem entirely.
If the desk suddenly looks calmer after step three, that's normal. Fewer cables is the cheapest form of cable management.
Plan the route before you bundle
Think of each cable as a road that needs a destination. A plan on paper (or in your head) keeps you from zip-tying something that turns out to be four inches too short.
Three common routes, as described by HP's desk setup guide: behind the monitor, horizontally along the underside of the desk, and down one desk leg toward the outlet. They work together. Short device cables hide behind the monitor, then everything joins a single horizontal run, then one bundle drops down a leg.
A few planning rules I rely on:
- Choose one exit. Pick the leg closest to the wall outlet and send everything that way.
- Group by function. Power together, data together. It makes troubleshooting easier.
- Leave slack at both ends. A cable pulled tight eventually loosens a connector.
- Label the plugs. A small tag near each plug saves you from pulling the wrong one later.
How to hide cables under a desk
This is where most of the visual change happens. The goal is for your eye to find a clean desktop and a quiet floor, with the mess collected in one place you can still open.
Mount a tray or raceway
An under-desk tray holds the power strip and the surplus cable length off the floor. HP's guide recommends trays or raceways for larger bundles and power strips. Wirecutter points to the tray as a good fit for renters or anyone who would rather not drill, because it keeps a surge protector and its cables close but out of sight.
If your desk has a grommet hole near the back, feed the monitor and peripheral cables through it so they drop straight into the tray instead of draping over the edge.
Use sleeves for runs of three to five cables
HP suggests sleeves for roughly three to five cables, and using a tray and sleeves together for the cleanest result. Pick an openable (split) sleeve if you expect to add or swap cables. A closed sleeve looks neat but means unplugging everything to change one thing.
Clips and ties for fixed runs
Wirecutter recommends clips for cables that stay put, reusable ties for thicker bundles, and labels or snaps where a cable may need repositioning. I favor hook-and-loop ties over plastic zip ties. You can undo them in seconds, and they don't cut into the cable jacket.
Adhesive options and what they cost you
Wirecutter notes that adhesive metal plates or metal tape can create an attachment point under a desk, but adhesive may damage furniture when it is removed. On a rented or valuable desk, test somewhere hidden first, or lean on a tray that clamps on instead.
Quick comparison of common tools
| Tool | Best for | Easy to change later? | Drilling needed? |
|---|---|---|---|
| Under-desk tray | Power strip, bricks, extra length | Yes | Often screws, some clamp on |
| Raceway or channel | Larger bundles along an edge or wall | Moderate | Usually adhesive or screws |
| Split sleeve | 3 to 5 cables running together | Yes | No |
| Reusable hook-and-loop tie | Thicker bundles | Yes | No |
| Clips | Fixed single runs | Yes | Adhesive or none |
| Magnetic tie | Charging leads you use daily | Yes | No |
Keep the plugs you use visible
Hiding everything sounds like the goal, but it creates its own problem. Wirecutter's view is that hiding every connector is counterproductive: the cable ends you touch often should stay visible and reachable, while the excess length is concealed.
Magnetic cable ties are a neat answer. They let a charging lead rest at the desk edge, ready to grab, while the bulk of the cord stays hidden below. Phone, headphone and laptop charging leads are the usual candidates. If you like a cleaner look still, a drawer or cabinet works well; we cover those in our guide to hidden charging station ideas.

Sit-stand desk cable management
A height-adjustable desk raises the stakes, because every cable has to survive the full travel from sitting to standing. Wirecutter's advice boils down to this: mount the power strip and cable management to the desk or its frame so they move with it, leave enough slack for the highest position, and test from lowest to highest.
The benefit of mounting the strip under the desktop is that only one cord travels to the wall outlet. Everything else moves together as a unit.
Here is the sequence I use:
- Raise the desk to its tallest setting before you mount anything.
- Attach the power strip or tray to the underside of the desktop or the frame.
- Route each cable with a loose loop, not a taut line, so it can lengthen and shorten.
- Clip the bundle at the desk, leaving the final lead free to the outlet.
- Run the desk down and up slowly. Watch for pulling, snagging, or cable dragging on the floor.
- Retest after the final clipping, because tightening one clip often changes the slack elsewhere.
A spiral sleeve or a cable chain can help the long drop behave, but the principle stays the same: slack where it moves, clips where it doesn't.
Home office cable management
In a home office, the number of cables is the main lever. A USB-C docking station can consolidate monitor, keyboard, mouse, Ethernet, charging and other USB connections into a single hub connection, according to HP. One cable to the laptop is easier to hide than six, and it makes plugging in at the start of a workday a one-step task.
A practical combination, drawn from Wirecutter's cord guide, looks like this:
- A dock to reduce connections
- An under-desk tray for the power strip
- Sleeves for grouped runs
- Clips or magnetic ties for charging leads you grab daily
- Reusable hook-and-loop ties and labels
- A raceway or clips for any run along a wall or baseboard
Real Simple's cord guide lands in similar territory: adjustable ties, labels, raceways, removable clips, and mounting power strips inside suitable furniture.
Once the cables are calm, look at the light. A tidy desk under a harsh or dim lamp still feels unfinished, and our notes on home office lighting cover the 300 to 500 lux range we test for focus.
TV and living room cable management
The same logic applies when the cables belong to a TV, a console or a soundbar, with one difference: they are visible from the sofa, so they affect the whole room.
- Under the unit. How-To Geek suggests an under-unit rack or tray for power strips and bulky adapters, with reusable ties to keep the bundle organized and out of sight.
- On a wall-mounted TV. When running cables inside the wall isn't possible, adhesive cable concealers can cover the drop, and they can be painted to match the wall.
- For renters. Our renter-friendly guide to hiding TV wires walks through a one-hour approach that avoids damage.
- For speakers. If wires run across a room, see our design-first ways to hide speaker wires.
- For the whole wall. Cable routes are easier to plan when the layout is, too. Our warm minimalist TV wall ideas show how.
Safety checks before you tuck anything away
Hidden cables are still live cables, and a tray is a good place for heat and dust to build up unnoticed. These checks come from U.S. safety bodies.
- Inspect the cords. The Electrical Safety Foundation International (ESFI) advises that damaged, hot, cracked or frayed cords be replaced, and that cords be correctly rated and not overloaded. The same brochure says not to run them under rugs.
- Keep cords clear of traffic and furniture. ESFI's indoor safety booklet says cords should be intact, kept out of walkways and not trapped beneath furniture. It also treats extension cords as temporary solutions rather than permanent wiring.
- Respect the ground pin. Three-wire appliances need grounded three-wire cords, and the third prong must never be removed. Damp locations call for GFCI protection, per the same brochure.
- Don't nail or staple. ESFI recommends products certified by a nationally recognized testing laboratory such as UL, ETL or CSA, and warns against nailing or stapling cords to walls or baseboards. Use adhesive clips or a raceway instead.
- Check the basics of the cord itself. The Consumer Product Safety Commission's extension cord guidance says cords lacking features such as minimum wire size, strain relief and proper polarization present shock or fire risks.
If a power strip feels warm, a plug is discolored, or a breaker trips repeatedly, unplug the load and have a licensed electrician look at the circuit.
Keep it easy to clean and change

A setup that can't be changed will be abandoned the first time you buy a new monitor. WIRED's advice for maintainable setups is to use removable clips, reusable ties, accessible trays and labeled plugs, and to choose openable sleeves so changes don't mean starting over.
Twice a year, pull the tray's contents into view, vacuum the dust, and check each plug for tightness and warmth. It takes five minutes, and it's the best moment to retire a cable you no longer use.
Our view: hide the mess, keep the control
We build The Connected Dwelling around one idea: technology should work in a home without announcing itself. Cable management is the clearest example. A room can have good lighting and thoughtful materials and still feel unsettled because of a tangle behind the desk.
Our approach is to explain why each choice works, not just list products. A tray works because it gathers weight and length in one place. A sleeve works because grouped cables look like one object. A magnetic tie works because it respects how you actually use the desk.
We also think the best system is one that adapts as your life does: a new baby's nursery, a second monitor, a move to a rental. That is why we lean toward reversible, no-drill solutions and one clean cable path, and why we pair them with lighting and layout so the whole space feels easy to read.
August
Take the same approach to the rest of the room
Desk cables are one piece of a home that looks calm and works well. On The Connected Dwelling we cover lighting, layout and connected devices with the same design-first thinking. If you're building out the rest of your setup, start with our guide to a smart home that doesn't look like a smart home, or explore the full Connected Home section.

Smart plugs can also simplify desk power. See what to plug in and what to avoid before you add one to your tray.
FAQ
What is the easiest way to hide cables under a desk?
Mount a tray beneath the desk, put the power strip in it, and run your cables horizontally and then down one leg. Use hook-and-loop ties or a split sleeve to group them. Wirecutter notes a tray suits renters, since it avoids drilling.
How do I manage cables on a standing desk?
Attach the power strip and cable management to the desk so they move with it. Leave enough slack for the highest height, then run the desk through its full range and watch for snagging or floor drag. Retest after you finish clipping.
Should I hide every cable?
No. Keep the ends you use often, such as charging leads, visible and within reach, and hide the extra length. Magnetic ties are one simple way to do this.
Can I staple or nail cables to the wall or baseboard?
No. ESFI warns against nailing or stapling cords. Use adhesive clips or a raceway instead, and choose products certified by a recognized testing lab such as UL, ETL or CSA.
How can I have fewer cables to hide in the first place?
Remove cables you no longer use, move rarely used accessories off the desk, and consider a USB-C dock that brings monitor, peripherals, Ethernet and charging through one connection to your laptop.
Sources
- The WIRED Guide to Wires
- Wirecutter: How to Organize All Your Cords, Cables, and Wires
- Wirecutter: How to Organize Your Desk
- HP: How to Organize Cables and Keep Your Desk Setup Clean
- Real Simple: How to Organize and Hide Messy, Tangled Cords
- How-To Geek: 10 Cable Management Tips for Around the Home
- How-To Geek: The Best Tools for Beautiful Cable Management
- ESFI: Indoor Electrical Safety Check Booklet
- ESFI: Use Extension Cords Safely
- ESFI: Pull the Plug on Cord-Related Hazards
- CPSC: Extension Cords Business Guidance



